Камерны дагалдах / accessories

Express CCTV

Key Specifications<ul><li>Port Configuration: It features&nbsp;10 Gigabit (10/100/1000Mbps)&nbsp;RJ45 ports, consisting of&nbsp;8 PoE ports&nbsp;and&nbsp;2 Gigabit Uplink ports.</li><li>Power Output:</li><li class="ql-indent-1">Total PoE power budget is&nbsp;85W.</li><li class="ql-indent-1">Port 1 supports up to&nbsp;30W, while ports 2–8 support up to&nbsp;15.4W&nbsp;each.</li><li class="ql-indent-1">Compatible with&nbsp;IEEE 802.3af/at&nbsp;standards.</li><li>Extended Range: Includes a "Network Extension Mode" switch. When enabled, it limits the rate of ports 1–4 to&nbsp;10Mbps&nbsp;but extends the transmission and power delivery distance to over&nbsp;260 meters.</li><li>Design: It is an&nbsp;unmanaged&nbsp;plug-and-play device with a fanless metal housing for silent operation.</li></ul>Usage and Benefits<ul><li>Simplified Wiring: Uses a single Ethernet cable to transmit both data and power to devices like IP cameras, wireless access points, and VoIP phones.</li><li>Reliability: Features overload protection and temperature control to ensure stable 24/7 operation.</li></ul>

10PoE Gigabit 2Uplinks Mercury switch

10-port Gigabit PoE (Power over Ethernet) switch manufactured by Mercury, designed primarily for security monitoring and home office network expansion

Cat6a Гигабит Холбогч

Кат6а Гигабит хурдаар 2секундэд дамжууллагын хурдтай холбогч

ID E311 Wireless mouse

Rj45 coupler - холбогч

Сүлжээний кабель холбогч

RJ45, Cat6, High quality, кристал толгой 100ш

Цэвэр зэсэн, кристал cat6 толгой, 100 ширхэгтэй

Cat5e RJ толгой 100ш

Цэвэр зэс, Кристал толгой , 100 ширхэг, Гигабит сүлжээ

8+2Port POE Switch

Mercury 10Port 10/100Mbps networking switch

4+2Port POE Switch

Mercury 6Port 10/100Mbps networking switch

Tenda desktop 8port Gigabit switch

Purpose: The set is designed specifically for transmitting monitoring video data within elevator shafts.Frequency: It operates in the 5 GHz (marketed as 5.8G) frequency band, which helps avoid interference from the common 2.4 GHz band.Performance:<ul><li>Speed: Offers a maximum transmission rate of up to 450Mbps.</li><li>Distance: The wireless range is up to 1 km, which is sufficient for high-rise buildings (e.g., up to 100 floors).</li></ul>Installation: The kit uses PoE (Power over Ethernet) network cables for power and does not require complex configuration, functioning as a plug-and-play solution.Durability: The devices are designed to withstand challenging conditions, likely featuring an IP rating (though the specific rating for this model isn't specified in all sources, similar models have IP67 protection).

The TP-Link TL-E501 elevator set [5.8g]

The TP-Link TL-E501 elevator set [5.8G] is a dedicated wireless bridge kit for elevator monitoring that uses the 5.8 GHz frequency band to provide a stable, anti-interference connection for video transmission

Wireless Performance: It operates on the 2.4GHz frequency band with a wireless rate of 300Mbps.Transmission Distance: The maximum transmission distance is rated at up to 500 meters in non-interference situations, suitable for buildings within this height range.Hardware: The kit includes both a fixed-end unit and a car-end unit, each equipped with 7dBi dual-polarized directional antennas and two 10/100M RJ45 ports.Ease of Use: Reviewers praise the simple, plug-and-play installation, requiring no complicated setup, and its stable signal transmission without delays or disconnections.Power: The devices support Passive PoE (Power over Ethernet) for flexible installation.Management: The units support web interface management for configuration, though they come pre-paired from the factory for immediate use.

TP-Link wireless bridge kit designed for elevator surveillance systems

The TP-Link TL-E201 kit is primarily used in commercial and residential buildings for elevator monitoring